Puffer jacket manufacturer
Stitchvero makes custom puffer jackets and vests for clothing brands. The shell, fill, quilting pattern, hood and trims are built to your specification.
Stitchvero is a puffer jacket manufacturer in Pakistan that makes custom puffer jackets and vests for clothing brands, with a minimum order of under 50 pieces per style. A puffer is engineered more than styled. Its look and warmth come from three things working together: the shell fabric, the fill, and the quilting that holds the fill in place.
How a puffer is built
A puffer is a sandwich. The outer shell and the inner lining enclose a layer of insulation. Lines of stitching, called quilting, divide the jacket into chambers, often called baffles, so the insulation cannot slide down to the hem. The size and shape of those chambers decide how much the jacket puffs. Because the fill takes up space inside, a puffer pattern is cut larger than the finished measurements, and the right allowance is worked out during sampling.
Fill
Insulation in puffers is either down or synthetic. Synthetic polyester fill is the common choice for brand production. It is consistent from batch to batch, keeps insulating when damp, is easy to wash and avoids animal products. It comes as sheet wadding, which is quilted in flat layers, or as loose fiber blown into chambers for a rounder, loftier look.
Fill is specified by weight. A light fill gives a slim layering jacket. A heavy fill gives the big, rounded streetwear puffer. State the look you want and whether the jacket is for mild or cold winters, and the fill weight is proposed at the sample stage. Your quote confirms the fill type for your design.
Quilting patterns
- Wide horizontal channels give the classic bold puffer with large rolls.
- Narrow horizontal channels give a slimmer, lighter-looking jacket.
- Diamond or onion quilting gives a flatter liner-jacket look.
- Chevron or shaped channels add a design line across the chest or back.
- Boxes hold loose fill evenly in very lofty jackets.
Channel width should be given in centimeters or inches for the base size. It can stay fixed or scale across sizes.
Shell and lining
The shell must be woven tightly enough that fill fibers do not work their way through it. Nylon and polyester are standard. Finish options are matte, semi-gloss and high-shine. A water-repellent finish helps the shell shed light rain and snow, though a quilted puffer is not a waterproof garment because every stitch line is a row of needle holes. The lining is usually a smooth nylon or polyester so the jacket slides on over a hoodie.
Design details
| Element | Options |
|---|---|
| Shell | Nylon or polyester, matte, semi-gloss or shiny |
| Fill | Polyester wadding or loose fiber fill, light to heavy |
| Quilting | Wide or narrow channels, diamond, chevron, box |
| Collar | Stand collar, fixed hood, detachable hood |
| Length | Cropped, waist length, longline |
| Cuffs and hem | Elastic binding, inner rib cuff, drawcord hem |
| Closure | Chunky molded zipper, two-way zipper, snap storm flap |
| Format | Jacket or sleeveless vest |
The cropped, boxy puffer with a stand collar is the shape most streetwear brands start with. A vest uses the same body with bound armholes.
Branding a puffer
Decoration needs planning because of the quilting. Embroidery is done on the shell panel before the jacket is filled and quilted, and it works best on a flat, unquilted area such as a chest panel or yoke. Other common methods are woven or rubber-style patches, printed logos using inks or transfers suited to nylon, and branded zipper pulls and snaps. The decoration services page lists methods, and placement is documented in the tech pack.
Sampling with a puffer jacket manufacturer
A puffer should never go to bulk without a sample. Check the loft in every chamber, the evenness of the fill, whether fibers show through the shell, zipper action under the storm flap, and the fit over a hoodie. The stages are explained under sample development, and bulk is checked against the approved sample as described on the quality control page.
If you do not have a specification, tech pack development can build one from a reference jacket. Your quote states the price per piece, the sample plan and the production timeline for your quantity. Lighter alternatives are the windbreaker and the padded bomber, and all outerwear is summarized on the jacket manufacturing page. Request a puffer jacket quote to start.
Questions brands ask us
What is a puffer jacket filled with?
Puffers are filled with down or synthetic insulation. Synthetic polyester fill is the common choice for brand production because it is consistent and easy to care for. Your quote confirms the fill for your design.
Can I choose the quilting pattern?
Yes. Channel width and quilting shape are part of your design, from wide horizontal channels to diamond or chevron patterns.
Are puffer jackets waterproof?
A water-repellent shell sheds light rain and snow, but quilted puffers are generally not waterproof because the stitch lines pass through the shell.
Do you make puffer vests?
Yes. A puffer vest uses the same construction as the jacket without sleeves and is specified the same way.
What is the minimum order for puffer jackets?
The minimum order is under 50 pieces per style. The quote confirms the breakdown by size and color.
Tell us what you want to make
Share the product, quantity and target date. We reply with a price, a sample plan and a timeline.