Custom clothing printing and embroidery
Stitchvero applies screen print, puff print, DTG, DTF, embroidery and chenille patches in-house to the garments it manufactures. Compare the techniques below.
Stitchvero is a clothing manufacturer in Pakistan that offers custom clothing printing and embroidery in-house, applying screen print, puff print, DTG, DTF, embroidery and chenille patches to the hoodies, shirts and streetwear it makes. Decoration is part of production, not a separate job sent to another shop.
This is a service for garments we manufacture. We are not a print-on-demand service and do not decorate blanks supplied from elsewhere.
Custom clothing printing and embroidery techniques compared
Each technique has a job it does well. The table reflects general industry knowledge and applies to most factories.
| Technique | Best for | Feel | Limits |
|---|---|---|---|
| Screen printing | Bold graphics with a limited number of solid colors | Soft to slightly raised, depending on the ink | Each color needs its own screen, so many colors raise setup cost |
| Puff print | Raised logos and lettering with a 3D effect | Raised and slightly spongy | Fine lines and small text lose definition as the ink expands |
| DTG | Full-color artwork, gradients and photos on cotton | Soft, with ink sitting in the fabric | Works best on high-cotton fabric. Slower per piece than screen printing |
| DTF | Full-color designs on many fabric types, small detailed placements | Smooth film layer on the surface | Large solid areas can feel less breathable |
| Embroidery | Logos, chest and sleeve marks, a durable premium finish | Textured and stitched | Very small text and gradients do not translate well. Dense designs can pucker light fabric |
| Chenille patches | Varsity letters and large bold shapes | Thick, soft pile with a felt edge | No fine detail. Adds weight, so it suits heavier garments |
Printing methods in more detail
Screen printing pushes ink through a mesh screen, one color at a time. It is the standard for streetwear graphics because the colors are opaque and the print holds up to washing. Setup cost is spread across the run, so it becomes more economical as quantity rises.
Puff print is a screen print made with an ink that expands under heat. It gives hoodies and tees a raised graphic and works best with bold shapes. Our puff print hoodies page shows how it is used.
DTG, or direct to garment, prints the design onto the fabric with an inkjet process. DTF, or direct to film, prints the design onto a film that is then heat pressed onto the garment. Both handle unlimited colors without screens, which suits detailed artwork and smaller quantities.
Embroidery and chenille patches
Embroidery stitches the design into the garment with thread. Artwork is first digitized into a stitch file, which sets the stitch direction and density. It suits heavyweight fleece especially well, as our embroidered hoodies page explains. Variations include flat embroidery, raised 3D embroidery and applique, where fabric shapes are stitched down.
Chenille patches are made separately from looped yarn on a felt base, then sewn or pressed onto the garment. They are the classic finish for varsity jackets and oversized letter graphics.
How to choose a technique
- Count the colors. One to four solid colors points to screen print. Photos and gradients point to DTG or DTF.
- Check the detail. Fine detail suits DTG, DTF or flat screen print. Bold shapes suit puff and chenille.
- Consider the fabric. Heavy fleece carries embroidery and patches well. Lightweight jersey suits prints.
- Think about quantity. Screen print favors larger runs. Digital methods suit small ones.
- Mix techniques. A screen printed back with an embroidered chest logo is a common streetwear combination.
Decoration on hoodies and shirts
Hoodies and shirts are our two main products. On hoodies, heavyweight fleece gives a stable base for puff print, embroidery and patches. See the hoodie manufacturer page for garment options. On tees, fabric weight affects how a print sits, which is covered on our t-shirt manufacturer page.
Because we cut and sew the garment, panels can be decorated flat before assembly. That allows oversized placements and prints that run to the seam.
Artwork we need
- Vector files such as AI, EPS or PDF for prints and embroidery
- High-resolution files for DTG and DTF artwork
- Pantone references for each color
- Dimensions and position for each placement
If the garment will be dyed or washed, tell us early. The order of printing and washing changes the result, as explained on our garment dyeing and washing page.
Request a decoration quote
Decoration is quoted with the garment, and every technique is sampled before bulk. Branding trims are covered under custom labels and packaging, and all in-house services are on the capabilities page. Request a quote with your artwork and quantities.
Questions brands ask us
Which is better, screen printing or DTG?
Screen printing suits bold designs with few colors and larger runs. DTG suits full-color, detailed artwork on cotton and smaller quantities.
What is puff print?
Puff print is a screen print made with an ink that expands when heated, creating a raised, three-dimensional graphic.
Is embroidery or printing more durable?
Both last well when done correctly. Embroidery is stitched into the fabric and is very durable, while screen print is the most wash-resistant print method.
Can you print on garments I supply?
No. Printing and embroidery are applied to garments Stitchvero manufactures as part of the production order.
Can I combine several techniques on one garment?
Yes. Combinations such as a screen printed back with an embroidered chest logo are common, and each is shown on your sample before bulk.
Tell us what you want to make
Share the product, quantity and target date. We reply with a price, a sample plan and a timeline.