Direct manufacturer of hoodies and shirts for clothing brands. Minimum order under 50 pieces per style.

Puff print hoodie manufacturer

Custom hoodies manufactured and puff printed in-house. Raised 3D graphics on fleece or French terry, tested on your fabric first. Minimum order under 50 pieces per style.

Request a quote Request a sample

Stitchvero is a puff print hoodie manufacturer in Pakistan that cuts, sews and prints custom hoodies with raised 3D graphics for clothing brands, with a minimum order of under 50 pieces per style. The hoodie and the print are made in the same factory, so the artwork is tested on your actual fabric before bulk.

What puff print is

Puff print is a screen printing technique. An expanding additive is mixed into the ink, the design is printed through a screen as usual, and when the print is heat cured the ink rises. The result is a raised, soft, slightly rounded graphic with a matte surface. It is sometimes called 3D print or raised print.

How high the print rises depends on the ink mix, the amount of ink laid down and the curing temperature. Those settings are adjusted in testing, which is why a print sample matters more for puff than for flat ink.

Artwork requirements for puff print

Because the ink expands in every direction, puff rewards simple artwork. These are general guidelines, and exact limits are confirmed when we review your file.

  • Bold shapes: block lettering, logos and solid icons give the strongest raised effect.
  • Line thickness: very thin lines do not rise evenly. As a general guide, keep lines at roughly 2 mm or thicker.
  • Spacing: leave clear gaps between elements, because expanding ink closes small spaces. Tight letter spacing and small counters can fill in.
  • No fine detail: halftones, gradients and distressed textures do not hold in puff. Use flat ink for those areas.
  • Large solid fills: very wide areas of puff can rise unevenly or crack with wear, so big designs are often built from outlines or broken shapes.
  • File format: vector artwork with each color and each puff area on a separate layer.

Fabric suitability

Puff prints best on a smooth, stable, cotton-rich surface. The face of a well-made fleece or French terry is a good base, and denser fabric gives a cleaner edge, which is one reason puff is common on heavyweight hoodies. Loose or hairy surfaces, deep rib and very stretchy fabrics are less suitable because the ink cannot sit evenly.

Fabric with a high polyester content needs care, since curing heat can cause dye from the fabric to migrate into the ink. This is checked in sampling. The same technique is used on tees, as described on our t-shirt manufacturing page.

Option Choices
Puff effect Low rise, standard rise, high rise
Color Tonal with the fabric, contrast, multi-color
Placement Chest, full front, back, sleeve, hood
Combination Puff with flat screen print, puff with embroidery, puff outline over flat fill
Base garment Pullover, zip-up, crewneck, in fleece or French terry
Finish Printed on dyed fabric, or printed after garment wash

Combining puff with screen print or embroidery

Puff is often one layer in a design, not the whole design. A common build is a flat screen printed graphic with selected words or outlines in puff, so the raised parts catch light and add depth. Tonal puff, where the ink matches the fabric color, gives a subtle embossed look.

Puff also pairs with stitching, for example a puff printed back with a small embroidered chest logo. See embroidered hoodie manufacturing for stitch options, and our printing and embroidery service for every decoration method we run in-house.

Puff print hoodie manufacturer process

  1. You send artwork with sizes and placements, plus your hoodie spec.
  2. We review the file and flag any lines or gaps that will not hold.
  3. A print strike-off is made on your fabric to set the rise and color.
  4. The hoodie sample is sewn with the approved print.
  5. After approval, bulk panels are printed, cured, sewn and inspected.

To check the result in hand first, request a sample.

Care and durability

Properly cured puff print is durable in normal wear. As general care guidance, wash inside out in cold water, avoid high heat tumble drying, and do not iron directly on the print. Printing these instructions on the care label reduces returns.

Get a quote

Your quote states the price per piece, the sample plan and the production timeline for your quantity. Request a quote with your artwork and hoodie details, or see all base styles on the hoodie manufacturing page.

Questions brands ask us

What is a puff print hoodie?

It is a hoodie decorated with screen printed ink that contains an expanding additive. When heat cured, the ink rises to form a raised, soft 3D graphic.

What artwork works best for puff print?

Bold lettering, logos and solid shapes with clear spacing. Thin lines, small text, gradients and fine distressing do not hold well because the ink expands.

Does puff print crack or peel after washing?

Correctly cured puff print holds up well in normal wear. Washing inside out in cold water and avoiding high heat helps it last.

Can puff print be combined with embroidery or flat print?

Yes. Puff is often used alongside flat screen print for depth, or with an embroidered logo in a different placement on the same hoodie.

What is the minimum order for puff print hoodies?

The minimum order is under 50 pieces per style. The number of print colors and placements is priced in your quote.

Tell us what you want to make

Share the product, quantity and target date. We reply with a price, a sample plan and a timeline.

Request a quote Message us on WhatsApp

WhatsApp