The clothing manufacturing process explained for first-time brand owners
Clothing production moves through design, tech pack, pattern, sampling, fabric, cutting, decoration, sewing, washing, finishing, inspection and shipping. Here is what happens at each stage.
Stitchvero is a clothing manufacturer in Pakistan that takes custom hoodies, shirts and streetwear from a brand’s design to a packed shipment, and this guide explains the clothing manufacturing process stage by stage for someone who has never placed a production order. For each stage it covers what happens, why the stage exists and what you are expected to do. The exact sequence varies a little between factories and products.
The clothing manufacturing process in two phases
Production has two phases. Development turns an idea into an approved sample. Bulk production repeats that sample across the whole order. Most problems in bulk can be traced back to something left unclear in development, so the first phase deserves most of your attention. If you want the short version as Stitchvero runs it, see our manufacturing process page. Unfamiliar terms are defined in the manufacturing glossary.
Phase one: development
1. Design and specification
You decide what the garment is: style, fit, fabric, color, decoration and branding. A factory cannot make these choices for you, though it can advise. The output of this stage is a clear description, ideally with sketches and reference photos.
2. Tech pack
The tech pack is the written instruction set for the garment. It contains flat sketches, a measurement chart with tolerances, fabric and GSM, trims, artwork placement, and label and packaging details. It exists so that nothing depends on memory or on a chat message. If you cannot produce one, a factory’s tech pack development team can build it from your sketch or reference sample.
3. Pattern making
A pattern maker turns the measurements into the flat shapes that will be cut from fabric: front, back, sleeves, hood, pocket, cuffs. The pattern decides how the garment fits. Two hoodies with the same chest measurement can fit differently because of the armhole and shoulder shape in the pattern.
4. Fabric and trim sourcing
The factory finds or develops fabric that matches your spec, along with rib, thread, zippers, drawcords and labels. For a custom color, a small dyed swatch called a lab dip is sent for approval. This stage can limit your options. A special fabric may need a minimum quantity from the mill. The fabrics page describes common choices.
5. Sampling
The factory cuts and sews one garment by hand from the pattern. Depending on the project there may be a first prototype, a fit sample, and a final pre-production sample in the real fabric with the real decoration. Each one answers a different question: does the design work, does it fit, is everything correct. The stages are described under sampling and product development.
6. Review and approval
You try the sample on, measure it against the size chart, wash it and check the artwork. You then approve it or send specific corrections. Approval matters because the approved sample becomes the physical standard for the order. Changing your mind after this point means repeating part of development.
Phase two: bulk production
7. Grading and marker making
The approved pattern in the base size is scaled to the other sizes, which is called grading. The pieces for all sizes are then arranged on a layout called a marker so that as little fabric as possible is wasted.
8. Fabric inspection and cutting
Bulk fabric is checked for flaws and shade, and knits are left to relax so they do not shrink back after cutting. The fabric is spread in layers and cut to the marker. Cut pieces are bundled by size and color. Errors here are expensive because they repeat through every layer. This is the start of what is called cut and sew production.
9. Decoration
Printing and embroidery are often applied to flat cut panels before sewing, because a flat panel is easier to position accurately. Some decoration, and some placements that cross seams, are applied to the finished garment instead.
10. Sewing
Bundles move along a line of operators, each doing one operation: joining shoulders, setting sleeves, closing side seams, attaching rib, hood and pocket. Checks during sewing catch problems while they can still be fixed on a few pieces instead of the whole run.
11. Washing or dyeing
Styles that are garment dyed or washed go through that process after sewing. This stage changes color, hand feel and measurements, which is why it is tested on samples first.
12. Finishing
Loose threads are trimmed, garments are pressed or steamed, and labels and hang tags are attached.
13. Quality inspection
Finished pieces are compared with the approved sample and the tech pack. Inspectors check measurements, stitching, decoration placement and quality, color and general appearance. Pieces that fail are repaired or removed. Our quality control page explains the checks Stitchvero uses.
14. Packing and shipping
Garments are folded, bagged and packed into cartons, usually sorted by size and color with a packing list. The shipment leaves by air or sea with the documents needed for customs in your country.
What you do, and when
| Stage | Your job |
|---|---|
| Design and tech pack | Supply complete information and final artwork |
| Fabric and color | Approve swatches and lab dips promptly |
| Sampling | Test the sample properly and give precise feedback |
| Order confirmation | Fix quantities per size and color, and pay the agreed deposit |
| Bulk production | Stay available for questions and avoid changes |
| Shipping | Provide delivery details and arrange import clearance |
Where first orders usually go wrong
- Incomplete specifications. If a detail is not written down, the factory has to guess.
- Approving a sample from photos. Fit and fabric can only be judged in hand.
- Late changes. A change after cutting cannot be absorbed without cost.
- Slow replies. Production waits on approvals, so every unanswered question delays the order.
- Unrealistic launch dates. Leave room for a second sample and for shipping.
When your design is ready, request a quote. The quote states the price per piece, the sample plan and the production timeline for your quantity.
Questions brands ask us
What are the main stages of the clothing manufacturing process?
Design, tech pack, pattern making, fabric sourcing, sampling and approval, then grading, cutting, decoration, sewing, washing where needed, finishing, inspection, packing and shipping.
Why is a sample made before bulk production?
The sample proves the fit, fabric and decoration on a real garment. Once approved, it becomes the standard that every bulk piece is checked against.
What does cut and sew mean?
It means the garment is made from rolls of fabric that are cut to a pattern and sewn together, as opposed to decorating a ready-made blank.
Is printing done before or after sewing?
Often before, on flat cut panels, because positioning is more accurate. Some methods and placements are applied to the finished garment.
What does a first-time brand owner need to provide?
A clear design with a tech pack, sketch or reference sample, final artwork, quantities per size and color, and timely approvals at each stage.
Tell us what you want to make
Share the product, quantity and target date. We reply with a price, a sample plan and a timeline.