T-shirt tech pack: what to include
A t shirt tech pack defines the fit, fabric, collar and print placement of your tee so a factory can sample and produce it without guessing.
A t shirt tech pack is the document that defines the fit, fabric, collar and print placement of a tee, and Stitchvero, a t-shirt manufacturer in Pakistan, works from it to sample and produce custom t-shirts for clothing brands. A tee looks simple, which is why small details such as neck width and collar height decide whether it looks right. This guide covers every section and the measurement points that matter.
Sections of a t shirt tech pack
- Cover page. Style name and number, season, contact, date and version.
- Technical flats. Front and back line drawings, with close-ups of the collar, sleeve hem and any special seam.
- Construction details. Collar type, shoulder tape, stitch type at the hems, and whether the body has side seams.
- Measurement chart. Points of measure for the base size, each with a tolerance.
- Size grading. The increase or decrease for each size.
- Fabric. Composition, knit and GSM for the body, and the rib for the collar. The t-shirt GSM guide compares weights.
- Colors. Body, rib and thread colors with a reference code.
- Print and embroidery specs. Size, method, colors and position for each graphic.
- Wash or dye. Any garment dye or wash, with a reference image.
- Labels and packaging. Neck label or neck print, care label, hang tag, folding and bagging.
T-shirt measurement points
| Measurement point | How it is usually measured | Why it matters |
|---|---|---|
| Body length | High point of the shoulder to the bottom hem | Sets a cropped, regular or long fit |
| Chest width | Straight across, just below the armhole, laid flat | The main fit measurement |
| Shoulder width | Shoulder seam to shoulder seam across the back | Controls how far the shoulder drops |
| Sleeve length | Shoulder seam to sleeve hem | Short on a classic tee, near the elbow on an oversized fit |
| Sleeve opening | Across the sleeve hem, laid flat | A wide opening gives the boxy streetwear look |
| Neck width | Seam to seam across the neck opening | Too wide and the collar gapes |
| Front neck drop | From an imaginary line between the shoulder points down to the front collar seam | Sets how high the collar sits |
| Back neck drop | The same line down to the back collar seam | Affects how the tee sits at the nape |
| Collar rib height | Height of the finished neck rib | A taller, thicker rib reads as heavier and more premium |
| Hem width | Straight across the bottom hem | Keeps the body straight or tapered |
Give a tolerance for every point. Jersey stretches and relaxes, so small variation is normal. In general practice, body measurements carry a wider tolerance than collar and hem details.
Print placement specs
Print problems are usually placement problems. For each graphic, your t shirt tech pack should state:
- Position. Front, back, sleeve or neck, with the exact reference point.
- Distance from the collar. Measured from the collar seam to the top of the artwork.
- Centering. Centered on the body, or offset with a measurement from the center front or the side seam for a chest logo.
- Finished size. Width and height of the artwork on the base size.
- Scaling. Whether the artwork stays one size or scales across the size range.
- Method. Screen print, puff print, DTG, DTF or embroidery. Our printing and embroidery page explains when each one fits.
- Colors. A color code for each ink or thread.
- Files. Vector artwork, or a high resolution file for DTG and DTF.
Add a placement drawing with the artwork shown on the flat and the distances marked. On washed tees, state whether the print goes on before or after the wash, because that changes the look.
Collar and fabric notes
The collar is the part of a tee that customers judge first, so describe it fully. State the rib type, its composition, the finished height and whether the collar is single or double needle stitched. Rib with a small amount of elastane recovers better and helps the neck keep its shape. Say whether you want tape across the back neck and shoulders, which covers the seam and stops the shoulder from stretching. For the body, give the composition, the knit and the GSM, and note any finish such as a wash or enzyme treatment that changes the hand feel. If the tee is garment dyed, mention it here, because the factory cuts with extra allowance for shrinkage and uses thread that takes the dye. These lines take a minute to write and prevent most collar complaints.
Details that tees often miss
- Collar rib composition and height not specified, so the factory picks a default
- No shoulder tape or neck tape callout
- Hem stitch type and hem depth left out
- Fit described in words such as oversized, with no measurements
- One print size for all sizes, which looks small on the largest ones
- Neck label drawn but with no size or wording
From tech pack to sample
The pack is a starting point. The first sample shows whether the numbers produce the fit you had in mind, and the chart is updated after your comments. If you only have a sketch or a tee you like, our tech pack development service can build the pack for you. The broader guide to what a tech pack is covers the basics, and the hoodie tech pack guide covers fleece styles.
When the pack is ready, send it to our t-shirt manufacturing team and request a quote. The quote states the price per piece, the sample plan and the production timeline for your quantity.
Questions brands ask us
What should a t-shirt tech pack include?
Flats, construction details, a measurement chart with tolerances, grading, fabric and GSM, collar rib, colors, print placement specs, and label and packaging instructions.
How do I specify print placement on a t-shirt?
Give the artwork size, the distance from the collar seam to the top of the print, and whether it is centered or offset from a fixed point such as the center front.
Should the print scale with the size of the tee?
It is your choice. Many brands use one size for chest logos and two or three scaled sizes for large front or back prints so the graphic stays in proportion.
Do I need a tech pack for a simple t-shirt?
It is strongly recommended. Even a basic tee needs defined measurements, fabric weight and collar details, and we can build the pack from a sketch or reference tee if you do not have one.
Tell us what you want to make
Share the product, quantity and target date. We reply with a price, a sample plan and a timeline.